SWINE ACCESSORIES
Double L has a variety of swine accessories for your hog supply and equipment needs including Winches, Curtain Pockets, Two-Way Sorting Panels, Sow Feeders, Feed Hoppers, PVC Creep Dividers, and Thermostats. Our new product line of EcoDrive Winches are designed to deliver optimal power for any operations ventilation systems. Double L’s PVC Creep Dividers are designed for use in farrowing crates and can be field cut to size. They are economical, easy to install, lightweight yet very durable, and easy to clean. The 30″ x 36″ Two-Way Solid Sorting Panel was designed to address biosecurity issues. It is a lightweight yet extremely tough and durable SOLID hog sorting panel with no seams to harbor bacteria. The STF1415 HDPE Sow Feeder is very hygienic since there is not a front lip on the feeder, reducing feed buildup and bacteria. Much quieter than steel and lightweight, though very durable. Double L’s Rotomolded Curtain Pockets help seal curtain edges and protect hog building curtain from wind damage. Easily install in minutes with a handful of screws and can be easily power washed clean. The 4″ Poly Feed Hopper is used to feed sows in hog farrowing barns. It is constructed of rotomolded polyethylene and has a tapered front to minimize feed loss. The PTH20 Pit Transition Hood and Housing is designed to be used with a 20″ fan while the STH24 Sidewall Transition Housing is designed to be used with a 24″ fan and hood. Double L has 3 different thermostat options that are weather proof NEMA 3x enclosure that are resistant to high humidity, airborne contaminants, and most corrosive conditions with a temperature range of 40 degrees to 104 degrees. Each thermostat has a large easy to read knob and calibration. The T152-2 Two Speed Thermostat is designed to be used with fans that have a high / low built in. The T152-C Curtain Controller Thermostat is designed to control curtain – inlet actuators on temperature. The TH415 Single Stage Thermostat has a fast responding stainless steel sensor that resists corrosion and has a 2.5 differential.
EcoDrive 300
- Part No 17001
Motor 35 HP 115 1-Phase 60hz
Torque 300 Nm
Belt Speed 28 in/min.
Pulls
2 Belts 1050 lbs/belt- 2100 lbs. total
1 Belt 809 lbs/belt
EcoDrive 90
- Part No 170020
Motor 24VDC 60hz
Torque 90 Nm
Belt Speed 6 in/min.
Pulls - 2 Belts 386 lbs/belt – 772 lbs. total
- 1 Belt 750 lbs/belt
PVC CREEP DIVIDERS
Part 12837 37″ PVC Divider
Part 12890 90″ PVC Divider Part 12560-14 Two-Way Post
Part 12560-20 U-Channel
20″ high x 7/8″ thick panels or
508 mm high x 22.2 mm thick
and can be field cut to fit
STF1415 HDPE SOW FEEDER
Part 16450
14″W x 15″H (355.6 x 381 mm)
Ship Weight: 7.25 lbs (3.3 kg)
Stainless Steel Lip Protector
30″ x 36″ TWO-WAY SOLID SORTING PANEL
Part 16460
Framed Opening: 30″ x 36″
Ship Weight: 14 lbs
ROTOMOLDED CURTAIN POCKETS
Part 16495
18″ x 66″H (457.2 x 1,676.4 mm)
21 lbs / pr. (9.5 kg)
Part 16494
18″W x 78″H (457.2 x 1,981.2 mm)
22 lbs / pr. (10.0 kg)
Part 16498
18″W x 84″H (457.2 x 2,133.6 mm)
23 lbs / pr. (10.4 kg)
4″ POLY FEED HOPPER
Part 16454
14″L x 6″W x 13.3″H
(355.6 x 152.4 x 336.6 mm)
Ship Weight: 3 lbs (1.4 kg)
Holds approx. 20 lbs (9.1 kg)
The 4″ Poly Feed Hopper from Double L makes it easy to hand
feed sows. Durable and easy to clean, the 4″ Poly Feed Hopper
has tapered sides.
PIT TRANSITION HOOD AND HOUSING
Designed to be used with a 20″ fan, the hood consists of a 1-1/2 90 degree pit transition hood. A PVC shutter is included and is placed between the two hood parts before they are bolted together. The 90 degree hood may be mounted to a pump-out cover. The sidewall housing is designed to be used with the pit hood with the hood and housing bolted together. Heavy poly construction allows for back fill to normal ground level. 20″ housing covers a maximum opening of 13″ high x 50″ wide.
SIDEWALL TRANSITION HOUSING
Double L’s Sidewall Transition Housing is designed to be used with a 24″ fan and hood. The Sidewall Transition Housing and Hood are bolted together. Heavy poly construction allows for back fill to normal ground level. 24″ housing covers a maximum opening of 18″ high x 50″ wide.
TH415 SINGLE STAGE THERMOSTAT
Part 50165
Designed to provide precise control of heating and cooling Double L’s TH415 Single Stage Mechanical Thermostat is the perfect addition to poultry houses. Constuction of the thermostat gives it a water-resistant NEMA 4x enclosure resistant to high humidity, airborne contaminants, and most corrosive conditions. The TH415 is equipped with a fast-responding stainless steel sensor that resists corrosion and has a 2.5 degree differential. While in the field operators can simply recalibrate the thermostat with its adjustable dial. A 316 stainless-steel sensing coil is mounted on the side of the watertight ABS plastic enclosure.
With a temperature range of 40-104 degrees Fahrenheit, the TH415 is designed for controlling ventilation and heating equipment in even the harshest of Ag poultry house environments.
| ELECTRICAL RATINGS: | ||
| Volts A.C. 50/60 HZ |
120
|
240
|
| Full Load Amps. |
12
|
10
|
| Lock Rotor Amps |
48
|
36
|
| Non Inductive |
16
|
16
|
| Pilot Duty 125 VA 120/240 VAC | – | – |
T152-C CURTAIN CONTROLLER THERMOSTAT
Part 50168
Double L’s T152-C Curtain Controller Thermostat is designed to control curtain – inlet actuators on temperature. 316 stainless steel sensor for quick response. Large, easy to read knob, and calibration. A five-minute cycle timer may enhance operation of system. Simply tie the power supply to T152-C. The T152-2 Thermostat water-resistant NEMA 4x enclosure is resistant to high humidity, airborne contaminants, and most corrosive conditions. Temperatures range from 40º to 100ºF.
| ELECTRICAL RATINGS: | ||
| Volts A.C. 50/60 HZ |
120
|
240
|
| Full Load Amps. |
12
|
10
|
| Lock Rotor Amps |
48
|
36
|
| Non Inductive |
16
|
16
|
| Pilot Duty 125 VA 120/240 VAC | – | – |
T152-2 TWO-SPEED THERMOSTAT
| ELECTRICAL RATINGS: | ||
| Volts A.C. 50/60 HZ |
120
|
240
|
| Full Load Amps. |
12
|
10
|
| Lock Rotor Amps |
48
|
36
|
| Non Inductive |
16
|
16
|
| Pilot Duty 125 VA 120/240 VAC | – | – |
Part 50167
Double L’s T152-2 Two-Speed Thermostat is designed to be used with fans that have a high/low speed built-in. The T152-2 Two-Speed Thermostat has a 316 stainless steel sensor for quick response and a large easy to read knob and calibration. The 152-2 Thermostat water-resistant NEMA 4x enclosure is resistant to high humidity, airborne contaminants, and most corrosive conditions. Temperatures range from 40º to 100ºF.
